First Jeep FCA lease
We come out of a convention center to find a dent on the hood crease
Wondering how much effort needs to be put in to it.
Suggestions please
For lease return, or because you don’t want to look like riffraff driving around in a dented car?
If you can live with the dent, then just drive it until lease end, get the inspection a month or so before turn-in, and see what they say.
I doubt you’d get charged, but if they were to ding you for it, you could decided then whether to just pay the charge or fix it yourself.
Otherwise, if you can’t live with it, then just get quotes from Dent Wizard or your local body shop and get it fixed.
Should be easy PDR, $200-$300, maybe less. Hood dents are the easiest for them to fix because they have easy access to the back of the hood. You can even get a kit from Amazon and try it yourself. Be patient, and it takes a lot of elbow grease. The pros usually have much better tools to make it easy.
Thanks everyone for the responses.
@trism My lease is ending later next year but since this happened I was not sure whether this would need some sort of hood replacement and burn a super big hole in the pocket.
@j_e_f_f , @ElectricEliminator I can live with the dent (wish didn’t have to) BUT there is another one on the front bumper… (again parking lot) looks like a truck backed in and barely touched the bumper. That is exactly an inch and on the crease again… sooo was wondering if the 2 inches damage is ONLY one or could be multiple. Also the dent itself is less than an inch but left an impact nearby (someone sat on it or kept something heavy and pushed the thing in)
@cahrens I saw insulation behind the hood and just tried to push but no use, I am pretty sure that needs to be remove to get access to the metal but that would be easy for the PDR guys.
I would contact a paintless dent repair company for an estimate if I was going to drive something around for another year.
For the lease return, the published guidelines will give you an idea of what to expect. Someone mentioned the 2" guideline above.
Guidelines say one or more dents 2" or more. Says nothing about multiple dents less than that. If they are on different body panels I would imagine that you will be ok.
That looks like a perfectly adequate 5 inches…
It doesn’t seem like the OP is concerned about the looks of the car but more or less the total cost out of pocket when returning the lease. The best thing to do in this case would be to get your inspection done 30-60 days before the lease turn-in and fix anything they claim will be billed under the wear & tear charges.
Personally, I would wait until lease end and if it needed to be repaired, you can use PDR on the hood. Do not try to fix it yourself though or even play with it. I have learned from experience that it makes a successful PDR much harder. If you want it fixed right away, $2-300 like others have said. Don’t bother with the bumper. It might be much worse than it looks and could get expensive.
Thanks again for your responses
While my hope is to keep my cars spotless but i guess there are many things out of my control
I can drive it like this through the lease end but then the cost factor is making me curious
The dent itself is a dot in the crease but definitely pressure was put which gives the impact around.
Don’t overthink it, it’s really not a big deal.
If you don’t mind driving it for the next year as-is then just do that, forget the dents are even there (it will get easier with time).
Then schedule your inspection 1-2 mos. before lease end, as mentioned above, and see what they say.
The inspector will take a quick look at everything, a quick measurement if needed, and then move on to the next. They’re not going to micro analyze each and every ding or scratch.
They’ll most likely be just normal wear and tear, no charge, turn the car in and off you go.